The Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB that you referenced is compatible with truck bed tool boxes like you mentioned having. You just would install the forward upright assembly behind the tool box if the box goes over the bed rails. view full answer...
The Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRFA18A44 that you were looking at fits the 2017 Ford F-350 6-3/4' bed and it will not be a good fit for your 8' bed with tool box. If your tool box happens to sit below the truck bed rails then you could install the 8' version Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # 311-JEFA19A45. This has T-slot rails to allow a ladder rack to be fitted, such as the Pace Edwards Utility Rig Rack Truck Bed... view full answer...
The answer really depends on how your tool boxes are mounted to your 2005 Chevy Silverado 2500. Since the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 clamps onto your truck's bed rails (see photo), if the main tool box extends out to the rails, and/or if the side mounted tool boxes are up towards the bed rails, then it would not fit.
Each of the ladder racks that fit your truck do in fact clamp to the bed rails so you would likely need to remove the tool boxes to get... view full answer...
I have a solution for you, but Adarac specifically states that their ladder racks are not compatible with other bed-rail-mounted or stake-pocket-mounted accessories such as tool boxes. So the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A4004148 would not work with that.
However, since this ladder rack attaches to the top of the bed rail, you could install a tool box that fits inside the bed rails which would not interfere with the Adarac ladder rack. You could... view full answer...
The Erickson Truck Bed Ladder Rack, # EM07708 will work with either size bed and with a tool box mounted in the bed. The ladder racks mount to the under side of the truck's bed and can be mounted anywhere you need along the bed. As long as the racks can fit in the space between the tool box and tailgate and accommodate the length of your ladders, then you will have no problem with using the racks with either truck bed. view full answer...
You will be able to use the Easy Hitch Helper Hitch Aligner, part # JE00600, on your truck if the tool box does not interfere with the line of vision from your rear view mirror to the back of your truck.
I am including a video of the hitch helper that will show how the aligner will work on your truck. view full answer...
I spoke with the manufacturer of the DeeZee Red Label Truck Bed Tool Box # DZ8537B and they stated the this tool box is not rated to be stood on or have heavy objects placed on top of it. Doing so could bend the aluminum and damaged the box. view full answer...
Whether the Rightline Truck Bed Tent # RL110730 will fit in your 2008 Toyota Tundra with 6-1/2-foot bed depends on the exact type and size of your truck bed toolbox.
Some tool boxes extend over the tops of the bed rails, while others stay inside the bed rails. It may be possible to use this tent with either type, depending on the exact unit used, but if the tool box extends over the tops of the bed rails there will be some increased chance for its corners (or any other sharp edges) to... view full answer...
The base of the DeeZee # DZ8170LB truck bed toolbox measures 60-3/4 in width. I wasn't able to find a 100 percent confirmed width of your truck bed at the top between the bed side rails, but the width of 63-1/2 inches kept coming up. If that's the case, there will be a 2-3/4 inch difference in the width of the box and the width of the truck bed. If the toolbox is centered, that'd be about 1-3/8 inches per side, which is a pretty good fit. Just to be sure, I'd recommend you measure the width... view full answer...
Since the TracRac TracONE # TA27000XTB that you referenced (or any ladder rack for that matter) installs on the bed rails of your 2005 Ford F-150 you will not be able to utilize a tool box that sits on the bed rails of your truck. Technically you could put the box on top of the clamps, but that would most likely damage them and/or your box.
The only way to get them to fit together is to either move the tool box or the front set of bars on the rack towards the middle of the bed.
You could,... view full answer...
A crossover tool box like the TruXedo TonneauMate Truck Bed Toolbox # TX1117416 is going to be needed with the Adarac Pro Series Custom Truck Bed Ladder Rack # A27VR. As the Adarac mounts into the stake bed pockets on the bed of your 2013 Toyota Tundra you cannot use a tool box which sits on top of the rails. view full answer...
The best tool box we have for a Ford F-150 with 5th wheel hitch is the UWS Truck Bed Toolbox Slim Line Series part # UWS07042 for silver or part # UWS07043 for black. These tool boxes only require 12" of space between the 5th wheel hitch and truck bed which you should have therefore will be your best option. The full size tool boxes are simply too deep to fit in the space above which is why you need the slim version. Furthermore, the low profile design will ensure you don't have any issues... view full answer...
With a crossover tool box on your 2020 Ford F-250, it truly depends on how your tool box installs on your truck and if it can be re-positioned. Since the Aries AdvantEdge Headache Rack - Chrome Powder Coated Aluminum # AA88VB mounts right on top of the bed's side rails at the rear of the cab (see attached picture), you will have to shift the tool box a bit toward the back of the bed so that the front end of the tool box rests against the bases of the headache rack.
For example, if your... view full answer...
I do have an option for you but the Rola Haul-Your-Might T3 Truck Bed Ladder Rack - Aluminum part # 59799 does not have a compatible hardware kit to allow you to mount a tool box.
I recommend to use the Thule TracRac TracONE Ladder Rack for Toyota Tacoma - Toolbox Mounts - Fixed Mount part # TH27000XTB-501. The ladder rack has the pre-drilled attachment points to securely mount a crossover-style tool box. Please keep in mind this ladder rack is designed for the deck rail system trucks.... view full answer...
Yes. I checked with Buyers Products and they informed me that the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 is compatible with crossover style tool boxes. I've attached a photo of one of our customers trucks that has this ladder rack and a crossover style tool box installed that you might find helpful. view full answer...
Yes, even with a low-profile tool box, you will still be able to use the Custom Third Brake Light Camera System - Night Vision - 7" Screen # 3460008.
The # 3460008. camera is adjustable so you can get the view you want, and while the top of the tool box will still be seen, the camera will still be effective for you to view the gooseneck ball or 5th wheel hitch in your Ford's truck bed. view full answer...
The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # 834532008460 will fit together with a tool box that is 19 to 21 inches wide that sits above the bed rails. Unfortunately, this is not adjustable and will not be able to work with your set up. This is also the only tonneau cover we currently carry for an F-250 that is rated for use with a tool box that sits above the bed rails.
However, if your tool box sits below the bed rails of your truck, like the UWS Truck Bed Chest - Secure... view full answer...
The Buyers Products Kabgard Headache Rack # 33785204 that you referenced does normally fit with tool boxes. I attached a picture of a crossover style box installed with the rack. As long as your box does not extend past the top of your bed rails this will work well with it. No additional hardware is needed for applications with tool boxes either.
I attached a review video link for this for you to check out as well. view full answer...
A great box for your 2014 Ford F-150 with 5-1/2-foot bed is the Du-Ha Humpstor Truck Bed Storage Box # DU70200. This USA-made heavy-duty polyethylene storage box installs over the wheel well in your truck bed and offers up to 2.3 cubic-feet of storage space. Best of all it fits perfectly underneath a tonneau cover like the TruXedo TruXport Soft Roll-Up Tonneau Cover # TX297601 that you referenced. This and all other tonneau cover fits for your truck can be seen on the included link.
TruXedo... view full answer...
Go To Results